Cold Planer - Severe Duty - High Flow | Blue Diamond
BD-SD-HF-CPLNR
out of stock
LIMITED TIME FREE SHIPPING!
10% discount applied.
Sale ends November 30, 2024
DETAILS
The all new Blue Diamond® High Pressure Severe Duty Cold Planer uses the most trusted components in the industry, from the Sauer piston motor, to the Fairfield planetary hub featured in the high-flow models. The all new Iron block design allows for up to 5000 psi (Highest in the industry). These high end components, combined with the highly engineered design, makes this one of the most reliable units available for a skid steer attachment. What sets the Severe Duty Cold Planer apart from the other Blue Diamond Cold Planers is the 8" Cutting Depth and the number of teeth on the cutting drum.
APPLICATIONS INCLUDE
- Removing asphalt surfaces prior to overlay
- Widening shoulders
- Repairing potholes
- Restoring drainage lines
- Mixing stabilizing agents into base for a more durable repair
MODEL | NUMBER OF TEETH |
MIN - MAX PSI |
MIN - MAX FLOW (GPM) |
WEIGHT |
---|---|---|---|---|
18" HIGH FLOW SEVERE DUTY |
46 | 3000- 5000 PSI |
30-45 GPM |
2,050 LBS |
24" HIGH FLOW SEVERE DUTY |
56 | 3000- 5000 PSI |
30-45 GPM |
2,300 LBS |
30" HIGH FLOW SEVERE DUTY |
66 | 3000- 5000 PSI |
30-45 GPM |
2,770 LBS |
40" HIGH FLOW SEVERE DUTY |
76 | 3000- 5000 PSI |
30-45 GPM |
3,000 LBS |
48" HIGH FLOW SEVERE DUTY |
106 | 3000- 5000 PSI |
30-45 GPM |
3,205 LBS |
features
- Hydraulic adjustment controls
- Hydraulic side shift
- Direct Drive
- High drum weight = less vibration
- 1 1/2″ thick drum tube
- Iron block allow for up to 5000 PSI
- Easy access tooth replacement
- Water kit available
- More teeth on cutting drum
- Cutting depth up to 8"
- Made in the USA
- 1 year warranty
WHAT MAKES THE BLUE DIAMOND COLD PLANER BEST IN CLASS
Iron Block - Most cold planers out on the market come standard with an aluminum block. The aluminum block typically allow for only up to 3500 PSI. The all new Blue Diamond Cold Planer has an iron block that allows for an industry best 5000 PSI.
Side Shift - side shift is a very important feature on a cold planer. Working alongside a curb is an issue faced by most any contractor and can be very frustrating when they are unable to get close enough. Our experience has shown that our cold planer has the most side shift off center in the industry giving you reach you need to get the job done right.
Drum supported on the opposing side from the motor. Our Cold Planer uses a premium load bearing opposite the motor side to support the drum. This is an obvious improvement over most competitors and keeps the machine running smooth and lengthens the life of the attachment.
Skid shoes versus roller wheels. Our experience with roller wheels is that due to the abrasive nature of the material they are in consistently, these last a very short time and then they become a nuisance.
Rocket fin teeth. These teeth turn as they cut and this provides longer tooth life by wearing the tooth consistently and also keeps the tooth from seizing in the holder. Longer tooth life and easier changing saves both time and money. The large access cover also makes tooth changes easier.